Setting 103 (CYC START/FH SAME KEY)
When Setting 103 is on, the CYCLE START button functions as the Feed Hold key as well. When CYCLE START is pressed and held in, the machine will run through the program; when it’s released, the machine will stop in a feed hold. This gives you much better control when setting up a new program.
This feature should be turned off when you’re done using it. Setting 103 can be changed while running a program, but it cannot be on when Setting 104 (below) is on.
Control Options
- Avoiding That Crash
- Automatic Maintenance Reminders
- Developing Offsets
- Removing Unnecessary Code
- The Haas Multi Function Jog Handle – Part 2
- The Haas Multi Function Jog Handle – Part 1
- Help to Restart
- Checking Tools Mid-Program
- Coolant Level
- Graphical Speed
- Reduced Peck
- Saving an MDI Program
- Backing Up Your Machine
- USB Drip Feeding (FNC)
- Duplicating/Editing a Program
- Ignoring Active Work Offsets
- Clearing Tool and Work Offsets
- Working out Drill Depth
- Search for Part of a Code in a Program
- Modelled Surfaces
- Setting 103 (CYC START/FH SAME KEY)
- Run Stop Jog Continue
