UMC-1000SS

40

TAPER

5

AXIS

12k

RPM

30+1

TOOL CAPACITY

5-Axis Universal Machining Centres


Universal Machines – 5-Axis Machining for Everyone

The Haas 5-Axis Universal Machining Centre has changed the landscape of the machine tool industry. Undeniably it has made 5-axis machining simple, affordable, and accessible to everyone.

Without doubt the larger travels and bigger platter of the Haas UMC-1000 makes it ideal for 5-axis machining of large parts. The UMC-1000SS is equipped with a faster spindle, high-speed tool changer, and high-speed trunnion table to reduce cycle times and boost productivity.

  • 5-axis simultaneous machining
  • Powerful inline direct-drive spindle
  • Large capacity side-mount tool changer
  • Includes Wireless Intuitive Probing System
  • Made in the USA

DWO/TCPC Changes Everything:

Dynamic Work Offsets (DWO) together with Tool Centre Point Control (TCPC) are software features in the Haas control. Unquestionably the features make setting up 4-axis and 5-axis jobs as easy as a 3-axis machine. Furthermore, they allow an operator to place the part and fixture anywhere on the machine’s platter. Chiefly they can do this regardless of the location programmed in the CAM system. What’s more this Haas software determines differences between locations programmed in the CAM system and within the machine and applies appropriate offsets.

  • Simplifies setup operations
  • Part and fixture can be placed anywhere on the table/platter
  • Saves money by eliminating costly workholding
  • No need to regenerate programs from the CAM system
  • Makes setting up 5-axis jobs as easy as setting up a 3-axis machine
  • Includes the Rotary Axis Calibration Tool

Bigger Parts? No Problem!


The UMC-1000 is the perfect choice for shops wanting a 5-axis machine to handle larger parts. It offers the same proven performance as our best-selling UMC-750.

Link to video

Link to Universal Machines

UMC-1000 walk-through


We talk about the design of our popular UMC-1000. Definitely check this video out particularly to see the bigger brother to our best-selling UMC-750.

Link to video

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.