The Best-Value Dual-Spindle CNC Lathe in the Industry
Rigid, high-performance CNC Turning Centres with a wide selection of available options for every workshop.
The DS-40Y Y-axis turning center combines dual-spindle turning with Y axis, C axis, and live tooling to create a powerful “done-in-one” machining solution for any shop. Off-centre milling, drilling, and tapping operations are possible for increased machining capabilities. It comes standard with a 12-station BMT75 turret and synchronized C axis for versatile 4-axis capability. The opposed spindles support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times.
The DS-40Y is a large-capacity lathe with a generous work envelope. The sub-spindle has a full C-axis for accurate positioning and interpolated live-tooling operations, and a mechanical brake that provides 250 ft-lb (339 Nm) of holding torque for off center milling and drilling.
- Dual-spindle design for done-in-one operations
- Y-axis milling, drilling, and tapping
- Fully interpolated sub-spindle C-axis with mechanical brake
- Fully synchronized part pass-off (up to 2400 rpm)
- Ideal for high-volume, high-production environments
Lathe Auto Parts Loader for Haas CNC turning centres
Take your production to the next level
The Haas Automatic Parts Loader is a simple and affordable way to automate part production and boost productivity on Haas CNC turning centres. It is designed and built exclusively for use on Haas turning centres and connects directly to the Haas control.
Dual-Spindle CNC Lathe with Y Axis; BMT75 Turrret, 699 x 1118 mm max capacity, 902 mm swing, ±3.00″ (±76 mm) Y-axis travel. Main Spindle: 40 hp (29.8 kW) vector drive, 2400 rpm, A2-8 spindle, 15″ (381 mm) chuck. Secondary Spindle: 30 hp (22.4 kW) vector drive, 3400 rpm, A2-6 spindle, 10″ (254 mm) chuck, 12-station BMT-75 turret, high-torque live tooling w/C axis, 15″ color LCD monitor, memory lock keyswitch, spindle orientation, USB port and rigid tapping. Includes standard toolholder kit.
Haas Dual-Spindle CNC Lathe Simplified
This DS-30Y demo is a lot simpler than our last one. But it’s pretty typical of the kind of parts that can be machined on these productive lathes. Turn, drill, counterbore, chamfer, handoff, turn, drill, counterbore, chamfer. And you’re done.
The DS-30Y Y-axis turning centre combines dual-spindle turning with Y-axis, C-axis, and live tooling to create a powerful “done-in-one” machining solution for any shop. It comes standard with a 12-station BMT65 turret and synchronised C-axis for versatile 4-axis capability.
