VM-3

TAPER

AXIS

12k

RPM

30+1

TOOL CAPACITY

Vertical Mould Making Machine; 1016 x 660 x 635 mm, 40 taper, 30 hp vector drive, 12,000 rpm, direct-drive, side-mount tool changer, 18.0 m/min rapids, automatic chip auger, remote jog handle, automatic air gun, high-speed machining, Ethernet interface, macros, coordinate rotation & scaling, programmable coolant nozzle, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, rigid tapping and 208 litre flood coolant system.

VM-3 - Compare to

VM-3
TRAVELS	S.A.E.	METRIC
X Axis	40 "	1016 mm
Y Axis	26 "	660 mm
Z Axis	25 "	635 mm
Spindle Nose to Table (~ max)	29 "	737 mm
Spindle Nose to Table (~ min)	4 "	102 mm
TABLE	S.A.E.	METRIC
Length	54 "	1372 mm
Width	25 "	635 mm
T-Slot Width	5/8 "	16 mm
T-Slot Center Distance	3.937 "	100.00 mm
Number of Std T-Slots	13 in Y, 6 in X	13 in Y, 6 in X
Max Weight on Table (evenly distributed)	4000 lb	1814 kg
SPINDLE	S.A.E.	METRIC
Max Rating	30 hp	22.4 kW
Max Speed	12,000 rpm	12,000 rpm
Max Torque	90 ft-lb @ 2000 rpm	90 ft-lb @ 2000 rpm
Drive System	Inline Direct-Drive	Inline Direct-Drive
Taper	BT or CT 40	BT or CT 40
SPINDLE (OPT)	S.A.E.	METRIC
Max Rating	30 hp	22.4 kW
Max Speed	15000 rpm	15000 rpm
Max Torque	90 ft-lb @ 2000 rpm	122 Nm @ 2000 rpm
Drive System	Inline Direct-Drive	Inline Direct-Drive
Taper	BT or CT 40	BT or CT 40
FEEDRATES	S.A.E.	METRIC
Rapids on X	710 in/min	18.0 m/min
Rapids on Y	710 in/min	18.0 m/min
Rapids on Z	710 in/min	18.0 m/min
Max Cutting	500 in/min	12.7 m/min
AXIS MOTORS	S.A.E.	METRIC
Max Thrust X	4100 lb	18238 N
Max Thrust Y	4100 lb	18238 N
Max Thrust Z	4100 lb	18238 N
TOOL CHANGER	S.A.E.	METRIC
Type	SMTC	SMTC
Capacity	24+1	24+1
Max Tool Diameter (adjacent empty)	5.0 "	127 mm
Max Tool Diameter (full)	3.0 "	76 mm
Max Tool Length (from gage line)	13 "	330 mm
Max Tool Weight	12 lb	5.4 kg
Tool-to-Tool (avg)	2.8 sec	2.8 sec
Chip-to-Chip (avg)	3.6 sec	3.6 sec
GENERALS	S.A.E.	METRIC
Air Required	4 scfm, 100 psi	113 L/min, 6.9 bar
Coolant Capacity	55 gal	208 L

Dimensions

Shipping Dimensions

Brochure

Manual

Rotary Table Fit Chart

See our verticals in action

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1.

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.