VF-9/50

TAPER

AXIS

7.5k

RPM

30+1

TOOL CAPACITY

Vertical Machining Centre; 2134 x 1016 x 762 mm, 50-taper geared-head, 30-hp vector drive, 7500 rpm, 30+1 side-mount tool changer, 15.2 m/min rapids, automatic chip auger system, programmable coolant nozzle, colour remote jog handle, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, Ethernet, memory lock keyswitch, rigid tapping and a 360 litre flood coolant system.

VF-9/50 - Compare to

VF-9/50
TRAVELS	S.A.E.	METRIC
X Axis	84 "	2134 mm
Y Axis	40 "	1016 mm
Z Axis	30 "	762 mm
Spindle Nose to Table (~ max)	35 "	889 mm
Spindle Nose to Table (~ min)	5 "	127 mm
TABLE	S.A.E.	METRIC
Length	84 "	2134 mm
Width	36 "	914 mm
T-Slot Width	5/8 "	16 mm
T-Slot Center Distance	4.92 "	125.0 mm
Number of Std T-Slots	7	7
Max Weight on Table (evenly distributed)	4000 lb	1814 kg
SPINDLE	S.A.E.	METRIC
Max Rating	30 hp	22.4 kW
Max Speed	7500 rpm	7500 rpm
Max Torque	340 ft-lb @ 700 rpm	460 Nm @ 700 rpm
Drive System	2-Speed Geared Head	2-Speed Geared Head
Taper	BT or CT 50	BT or CT 50
Bearing Lubrication	Air/Oil Injection	Air/Oil Injection
Cooling	Liquid Cooled	Liquid Cooled
SPINDLE (OPT)	S.A.E.	METRIC
Max Rating	30 hp	22.4 kW
Max Speed	10000 rpm	10000 rpm
Max Torque	250 ft-lb @ 700 rpm	339 Nm @ 700 rpm
Drive System	2-Speed Geared Head	2-Speed Geared Head
FEEDRATES	S.A.E.	METRIC
Rapids on X	600 in/min	15.2 m/min
Rapids on Y	600 in/min	15.2 m/min
Rapids on Z	600 in/min	15.2 m/min
Max Cutting	500 in/min	12.7 m/min
AXIS MOTORS	S.A.E.	METRIC
Max Thrust X	3400 lb	15124 N
Max Thrust Y	4100 lb	18238 N
Max Thrust Z	5600 lb	24910 N
TOOL CHANGER	S.A.E.	METRIC
Type	SMTC	SMTC
Capacity	30+1	30+1
Max Tool Diameter (adjacent empty)	10 "	254 mm
Max Tool Diameter (full)	4 "	102 mm
Max Tool Length (from gage line)	16 "	406 mm
Max Tool Weight	30 lb	13.6 kg
Tool-to-Tool (avg) 4.2 sec 4.2 sec Chip-to-Chip (avg)	6.3 sec	6.3 sec
GENERALS	S.A.E.	METRIC
Air Required	4 scfm, 100 psi	113 L/min, 6.9 bar
Coolant Capacity	95 gal	360 L

Dimensions

Shipping Dimensions

Brochure

Manual

Rotary Table Fit Chart

See our verticals in action

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1.

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.