VF-2

40

TAPER

3

AXIS

8.1k

RPM

20

TOOL CAPACITY

The industry-leading Haas VFs are the best-value, high-performance vertical machining centres available today.


A Wide Range of Sizes and Features to Fit Any Shop’s Needs – Vertical Machining Centres

Haas offers a wide range of VF Series CNC vertical machining centres to match any size and production requirement. Regardless of your needs, there’s a VF just right to meet the demands of your machine shop.

Every VF Series vertical machining centre provides outstanding features at an excellent price. By the same token there are a wide range of available options to customise your machine to your exact needs. Not to mention all Haas machines are designed and built in California, USA.

The VF-2 is our most popular model, and the workhorse of any shop.

  • High-power, direct-drive spindle
  • Customisable to your needs
  • Our flagship model
  • Made in the USA

VF-2 Vertical Machining Centre; 762 x 406 x 508 mm, 40 taper, 30 hp vector drive, 8100 rpm, direct-drive, 20-station carousel tool changer, 25.4 m/min rapids, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, Ethernet, memory lock keyswitch, rigid tapping and 208 litre flood coolant system.

How We Build The VF-1 Vertical Machining Centre Today


Back in the late eighties we started building our first VMC, the VF-1. We didn’t build them as efficiently as we do today, but they were good machines and laid the foundation for decades of milling machine development and improvement to come.

Today, our process is finely tuned and quite efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Link to video

Link to 40-Taper VF-Series

Wireless Intuitive Probing System


Drastically reduce setup times on your high-speed machine

Automate your high-speed machine’s setup process with the <a href=”https://www.haas.co.uk/wips/”>Haas Wireless Intuitive Probing System</a> (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, and optical machine interface. Furthermore, powerful software that guides the operator through the job setup process with intuitive, easy-to-use templates. WIPS allows you to quickly and easily define work offset coordinates. Additionally, set tool length offsets, and perform in-process inspection.

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.