VF-10/40

40

TAPER

3

AXIS

8.1k

RPM

30+1

TOOL CAPACITY

The industry-leading Haas VFs are the best-value, high-performance vertical machining centres available today.


A Wide Range of Sizes and Features to Fit Any Shop’s Needs – Vertical Machining Centres

Haas offers a wide range of VF Series CNC vertical machining centres to match any size and production requirement. Regardless of your needs, there’s a VF just right to meet the demands of your machine shop.

Every VF Series vertical machining centre provides outstanding features at an excellent price. By the same token there are a wide range of available options to customise your machine to your exact needs. Not to mention all Haas machines are designed and built in California, USA.

All large-frame models come with an upgraded features package that includes a side-mount tool changer, chip auger, programmable coolant nozzle, and remote jog handle.

  • High-power, direct-drive spindle
  • Customisable to your needs
  • Our flagship model
  • Made in the USA

VF-10 Vertical Machining Centre; 3048 x 813 x 762 mm, 40 taper, 30 hp vector drive, 8100 rpm, direct-drive, 24+1 side-mount tool changer, 9.1 m/min X rapids, 600 ipm Y & Z rapids, automatic chip auger, programmable coolant nozzle, colour remote jog handle, 15″ colour LCD monitor, USB port, Ethernet, memory lock keyswitch, power-failure detection module, 1 GB program memory, rigid tapping and a 360 litre flood coolant system. Outriggers standard. Anchor kit highly recommended for installation.

Master the Haas Side-Mount Tool Changer – Vertical Machining Centre


Have you ever wondered if you’re using your Haas side-mount tool changer as efficiently as possible? In this Tip of the Day, Mark explains how to define large and heavy tools, and shows how to load them properly, and designate them in the control to avoid a collision. Be sure to watch all the way to the end, where Mark demonstrates a cool trick for re-positioning tools within the Vertical Machining Centre carousel – without removing any tools!

Link to video

Link to 40-Taper VF-Series

Wireless Intuitive Probing System


Drastically reduce setup times on your high-speed machine

Automate your high-speed machine’s setup process with the Haas Wireless Intuitive Probing System (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, together with an optical machine interface. Furthermore, powerful software that guides the operator through the job setup process with intuitive, easy-to-use templates. WIPS allows you to quickly also easily define work offset coordinates. Additionally, set tool length offsets, moreover perform in-process inspection.

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.