TM-0P

40

TAPER

3

AXIS

6k

RPM

10

TOOL CAPACITY

Large Travels. Big Capabilities. Small Prices.


The TM-0P is the smallest and most affordable Haas TM-P Series CNC Toolroom Mills.

Its operational width is 500 mm narrower than the TM-1P.

The TM-P models include a 10-pocket automatic tool changer, a faster spindle, and higher rapids. The CNC Toolroom Mill Series is the true definition of value; they provide full CNC capabilities at affordable prices.

The TM Series CNC Toolroom Mills are affordable and easy to use. Equally important, they offer the precision control of the Haas CNC system. They use standard 40-taper tooling and are very easy to learn and operate. Moreover, they are the perfect option for colleges and companies transitioning to CNC.

  • 10-Pocket Tool Changer
  • 6,000 rpm Spindle
  • Chip Auger
  • Operates on single- or three-phase power
  • Conversational programming system
  • User-friendly Haas control
  • Affordable full CNC capabilities
  • HaasConnect remote monitoring
  • Made in the USA

TM-0P CNC Toolroom Mill; 508 x 305 x 406 mm, 40 taper, 7.5 hp vector drive, 6000 rpm, 10-pocket automatic tool changer, full enclosure, chip auger, Visual Programming System, power-failure detection module, 1 GB program memory, memory lock keyswitch, 15″ colour LCD monitor and USB port, Ethernet interface and 76 litre flood coolant system.


The Haas TM-0 CNC Toolroom Mill


Here’s a quick introduction to some of the most critical aspects of the brand-new TM-0 Tool Room Mill.
The TM-0 is the smallest and most affordable of the Haas TM Series Toolroom Mills. What’s more, the TM-0 and TM-0P are productive, easy to use, and offer the precision control of the Haas CNC system.

Link to video

Link to CNC Toolroom Mill Series


Wireless Intuitive Probing System

Drastically reduce setup times on your Mini Mill

Automate your CNC Toolroom Mill’s setup process with the Haas Wireless Intuitive Probing System (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, and optical machine interface. Furthermore, powerful software guides the operator through the job setup process with intuitive, easy-to-use templates. As a result, WIPS allows you to quickly and easily define work offset coordinates. Additionally, set your machine’s tool length offsets, and perform an in-process inspection.

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.