Compact Mill; 305 x 254 x 305 mm, ISO 20 taper, 5 hp vector drive, 30,000 rpm, 20-station automatic tool changer, coolant pump, high-speed machining, power-failure detection module, 1 GB program memory, memory lock keyswitch, 15″ colour LCD monitor, Ethernet interface and USB port.

Spindles 30,000-rpm Spindle
Tool Changers 20-Pocket Carousel
Chip & Coolant Management Window Air Blast
13-Gallon Coolant Tank
The Haas Control Media Display M-Code; M130
HaasConnect: Remote monitoring
Early Power-Failure Detection Module
Ethernet Interface
WiFi Connection for the Haas Control
Rigid Tapping
User-Definable Macros
Coordinate Rotation and Scaling
High-Speed Machining
Standard Program Memory, 1 GB
Shipping Lifting Provision
Warranty 1-Year Standard Warranty

See our verticals in action

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. When combined with strong workholding and modern milling methods, the results are very impressive. The VF-2SS is one of Haas’ most popular vertical machining centres. This is the video debut of the HRC210 roller cam rotary, and it is shaping up to be a great complement to the Haas product line. You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here:

And check out the TR200Y rotary table here:

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. We didn’t build them as efficiently as we do today, but they were good machines and laid the foundation for decades of milling machine development and improvement to come.

Today, our process is finely tuned and quite efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program. No more taping work instructions to the machine, or hand writing notes telling your operator how to load or inspect a part; put it all in your NC program!