Pocket Mill

TAPER

AXIS

RPM

TOOL CAPACITY

The compact and affordable Pocket Mill – Small but Mighty

Small enough to fit into nearly any pocket of space in your shop, while providing the features and performance of our full-size machines

The Haas Pocket Mill is small enough to fit into nearly any pocket of space in your shop, while providing the features and performance of our full-size machines, at a very affordable price.

It’s the perfect choice for start-up shops, schools, hobbyists, garage machinists, or anyone with limited space and a limited budget.

Operates on single- or three-phase power
Compact footprint
Standard 40-taper spindle
Available 10-pocket tool changer
Single- or 3-phase power

Pocket Mill; 305 x 305 x 381 mm, BT40 taper, 7.5 hp vector drive, 4,000 rpm, Optional 10-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, memory lock keyswitch, 15″ colour LCD monitor, Ethernet interface and USB port.

The Haas Pocket Mill is small enough to fit into nearly any pocket of space in your shop, while providing the features and performance of our full-size machines, at a very affordable price. It’s a great choice for start-up shops, schools, hobbyists, garage machinists, or anyone with limited space and a limited budget.

Pocket Mill - Compare to

Pocket Mill
TRAVELS	S.A.E.	METRIC
X Axis	12 "	305 mm
Y Axis	12 "	305 mm
Z-Axis	15"	381 mm
Spindle Nose to Table (~ max)	19 "	483 mm
Spindle Nose to Table (~ min)	4.0 "	102 mm
TABLE	S.A.E.	METRIC
Length	28 "	711 mm
Width	11.2 "	284 mm
T-Slot Width	0.626 in to 0.630 in	15.60 mm to 16.00 mm
T-Slot Centre Distance	4.33 "	110 mm
Number of Std T-Slots	3	3
Max Weight on Table (evenly distributed)	500 lb	227 kg
SPINDLE	S.A.E.	METRIC
Max Rating	7.5 hp	5.6 kW
Max Speed	4000 rpm	44000 rpm
Max Torque	33.0 ft-lbf @ 1200 rpm	45.0 Nm @ 1200 rpm
Drive System	Direct Speed, Belt Drive	Direct Speed, Belt Drive
Taper	BT 40	BT 40
Bearing Lubrication	Grease Packed	Grease Packed
Cooling	Air Cooled	Air Cooled
FEEDRATES	S.A.E.	METRIC
Rapids on X	200 in/min	5.1 m/min
Rapids on Y	200 in/min	5.1 m/min
Rapids on Z	200 in/min	5.1 m/min
Max Cutting	200 in/min	5.1 m/min
AXIS MOTORS	S.A.E.	METRIC
Max Thrust X	2000 lbf	8896 N
Max Thrust Y	2000 lbf	8896 N
Max Thrust Z	2000 lbf	8896 N
TOOL CHANGER	S.A.E.	METRIC
Type	Carousel	Carousel
Capacity	10 optional	10 optional
Max Tool Diameter (full)	3.5 "	89 mm
Max Tool Weight	12 lb	5.4 kg
Tool-to-Tool (avg)	44.2 sec	4.2 sec
GENERALS	S.A.E.	METRIC
Air Required	4 scfm, 100 psi	13 L/min @ 6.9 bar
Coolant Capacity	20 gal	76 L

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1.

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.