Home
Haas TL-2 CNC Toolroom Lathe
With a functional range from manual turning to full CNC, the Haas TL-2 Toolroom Lathe features a proprietary conversational operating system that makes cutting parts and creating part programs nearly effortless. The operator chooses an operation, touches off the X and Z surfaces, and is then prompted to enter basic dimension information. Default values for feed per revolution, spindle speed and depth of cut are automatically entered by the control, but may be changed by the operator. Once all necessary information is entered, a push of the Cycle Start button performs the desired operation. A Recorder function allows information to be saved for future retrieval.
The TL-2 operates in four modes. In all modes, the Haas control provides extremely accurate digital read-out (DRO) of position, displayed to 0.0005" when using the manual handwheels or to 0.0001" when using the electronic jog handle. Electronic soft stops may be set to limit the travel of the lathe.
In manual mode, the X and Z axes are moved via standard handwheels. In semi-automatic mode, the TL-1 performs simultaneous linear interpolation for both axes using a single handwheel. ID/OD chamfers and tapers, for example, are easily cut in semi-automatic mode. In automatic mode, built-in machining cycles (both single- and multi-pass) are available for rough and finish profiling, chamfering, grooving, parting off, threading, drilling and tapping. In full CNC, the TL-1 is programmed using standard G code, and all axis motion is regulated by the Haas control via a G-code program.
In manual mode, the X and Z axes are moved via standard handwheels. In semi-automatic mode, the TL-2 performs simultaneous linear interpolation for both axes using a single handwheel. ID/OD chamfers and tapers, for example, are easily cut in semi-automatic mode. In automatic mode, built-in machining cycles (both single- and multi-pass) are available for rough and finish profiling, chamfering, grooving, parting off, threading, drilling and tapping. In full CNC, the TL-2 is programmed using standard G code, and all axis motion is regulated by the Haas control via a G-code program.
Call 01603 760539 for further details on the Haas range of CNC machine tools or to discuss your requirements with a Haas expert.
Haas TL-2 Specifications
Haas Automation proudly sponsors Team Fusion - F1 in Schools and Tom Tunstall - British Superbikes
Member of the Manufacturing Technologies Association
© 2012 Haas Automation Ltd.
Terms & Conditions of Sale
Website Terms & Conditions
CNC Verticals VMC & Mills | CNC Horizontals HMC | CNC Turning Centres & Lathes
CNC Rotaries & Indexers | Haas USA
Toolroom
