CNC Machine telephoneHomeAbout Us CNC Verticals CNC Horizontals CNC Turning Centres Rotary Tables and Indexers Diamond Cut Wheel Lathes Service and Support Education Used Machines Exhibitions Haas Local Showrooms FREE CNC Magazine Request a Brochure Finance Customer Success Stories Tips and Tricks Recruitment Contact Us
Haas Finance

Haas HRT-210 Rotary Table

Haas CNC machine tools, CNC mills and CNC lathes

For holding medium to large parts or fixtures, the Haas HRT series of horizontal/vertical T-slot rotary tables is the answer. Chucks and fixtures can be easily bolted to the table using the six machined T-slots. Large through-holes allow bar feeding and special fixture locating. The Haas HRT 210 has a platter size of 210 mm (8.3").

All Haas rotary tables and indexers are equipped with AC brushless servo motors, which yield greater torque and higher acceleration / deceleration rates than standard DC motors. There’s less maintenance and better reliability, since there are no brushes that wear out and create dust. With the heat-producing windings attached to the outer shell, these motors run cooler, are more compact and last longer than brush motors.

• Greater power and torque
• Faster acceleration/deceleration
• Superior reliability

Call 01603 760539 for further details on the Haas range of CNC machine tools or to discuss your requirements with a Haas expert.


HRT210  
PLATTER S.A.E. METRIC
Diameter 8.3 "  210 mm
Number of Std T-Slots 6@ 60°   6@ 60°
SPINDLE S.A.E. METRIC
Max Speed 0.001 to 100 °/sec  0.001 to 100 °/sec
Max Torque 210 ft-lb  285 Nm
Runout Max 0.0005 "  0.013 mm
Backlash 30 arc-sec   30 arc-sec
Through Bore 2.0000 (+0.0005 -0) "  50.800 (+0.013 -0) mm
Center Height 6.000 ± 0.001 "  152.40 ± 0.03 mm
Gear Ratio 90:1    90:1
Timing 2:1    2:1
Brake Torque @ 100 psi/6.9 bar 200 ft-lb  271 Nm
INDEXING S.A.E. METRIC
Max Rotation/Step 999.999 °  999.999 °
Resolution 0.001 °  0.001 °
Accuracy (±) 15 arc-sec   15 arc-sec
Repeatability 10 arc-sec   10 arc-sec
Worm Gear Dia 6.3 "  160 mm
GENERAL S.A.E. METRIC
Power Requirement 115 VAC ± 10% @ 15 A   115 VAC ± 10% @ 15 A
Air Pressure Max 120 psi  8.3 bar
Operating Temp (max ambient) 100 °F  38 °C
Duty Cycle full/low speed 50/100  %  50/100 %
WEIGHT S.A.E. METRIC
Brushless Control 14.2 lb  6.4 kg
Table 165 lb  74.8 kg

 


Link to Haas on LinkedIn
Watch Haas on our YouTube ChannelFollow Haas on TwitterJoin Haas on FaceBooHaas on Google+SeeHaas on Pinterest






Haas CNC MTA membership lathes and mills

Member of the Manufacturing Technologies Association


© 2014 Haas Automation Ltd


Website Terms & Conditions

CNC Verticals VMC & Mills | CNC Horizontals HMC | CNC Turning Centres & Lathes
CNC Rotaries & Indexers | Haas USA

Click for CNC machines