Haas DM-1 Drill and Mill Centre
The DM-1 is a small-footprint, high-speed drill/mill centre with a 40-taper spindle. The machine has a 508 x 406 x 394 mm work cube and a 660 x 381 mm T-slot table. The 40-taper inline direct-drive spindle turns to 15,000 rpm, and allows high-speed rigid tapping, with up to four times retract speed. The spindle is coupled directly to the motor to reduce heat, increase power transmission, and provide excellent surface finishes. A 15-hp vector drive system provides 46 ft-lb (peak) of cutting torque for milling and boring operations.
The DM-1 provides cutting feedrates to 30.5 m/min for high-speed milling, and the machine’s 18+1 side-mount tool changer swaps tools quickly to reduce non-cutting time. High-speed 61.0 m/min rapids combine with high acceleration rates to shorten cycle times and increase throughput.
For efficient chip removal, the DM-1 features steeply sloped internal sheet metal. Optional twin chip augers transport chips to exit at the rear of the machine, allowing multiple machines to be placed close together. A 170 litre flood coolant system is standard, with options for a programmable coolant nozzle and high-pressure through-spindle coolant systems. A wide selection of options are available to further boost productivity, including high-speed machining software, wireless tool and work probing, 4th- and 5th-axis capability, and much more.
Call 01603 760539 for further details on the Haas range of CNC machine tools or to discuss your requirements with a Haas expert.
Coldon Engineering Limited
“The Haas service is great. They always have the spares we need in stock, don’t charge the earth for them, and as long as we call their service department before 4:30pm they’ll get the parts to us first thing next morning. If we need a service engineer to visit they’ll be here the same day or within 24hrs. I fully recommend Haas.”
“We’re able to call the applications department for advice and they’ve always managed to provide us with the solutions we need, whether over the telephone or in person. Haas have given us some CNC control simulators, so our students can test their programming skills without the danger of crashing one of our real Haas machines. The training that Haas offers has proved invaluable both to students and staff.”
BBR Engineering Limited
Titan Motorsport Limited
Woodbridge Engineering Limited
Headline Filters Limited
“In all cases, every possible part that could be required is shipped in for the Engineer. Any parts not required are collected the next day & are never installed unless absolutely required. This honest philosophy, together with realistically priced spare parts ans highly competent staff make the upkeep of even our older machines viable. I look forward to many more years dealing with Haas.”